Juergensen Marine

The All New "HAMMERHEAD"™

"DIVA™ System"

Display Integrated Vibration Alarm™

(Patent Pending)

To Be Included With EACH Hammerhead!

ANNOUNCING

The Juergensen Marine DIVA™

A Dynamic New Alarm and Monitoring System for CCR's!

Here's what's new about this system:

The DIVA™ is a Heads Up Display which mounts on your DSV using the supplied bracket. The cable for the module is sealed via a Swagelok connector and runs back to your Hammerhead HUD port.

At the top of the DIVA is an o-ring sealed Tri-Colored Light Emitting Diode, which flashes either Red, Green or Orange depending upon your system's condition, thereby allowing you, the diver, to monitor the status of your system and Oxygen Partial Pressure in a "hands-free" mode - meaning you don't have to constantly look at your Wrist Unit's to monitor your ppO2.

This system works essentially the same as our HUD unit described on our website HERE.

But one of the biggest problems faced by CCR Controllers and Dive Computers today is the issue of Alarms. Most divers hate Alarms - they either beep too loud (and too often), or they don't beep loud enough. Many times, when you hear a beep, it happens to be your dive buddy, or someone else near the dive site even!

Well - we decided to do something about that for CCR divers...

This is the inside of the new DIVA™. You will notice there is a blue cylinder behind the LED in the drawing above. This is a Sealed Vibrating Motor which, when activated, spins an eccentric weight at approximately 7,000 rpm. When attached to the Dive Surface Valve it not only transmits pulses of vibration to the divers mouth (a very sensitive place!) but also sound (described as a "buzzing bee" by our completely unwilling test subjects!) - you feel and hear your alarms at the same time - no more mistaking someone elses alarm for your own!

This is as "personal" as it gets!

In this image, we've cross-sectioned the DIVA™ so you can see the internal guts of the unit laid out. The entire package is 2.35 Inches long. The unit is completely sealed, and maintenance-free. The Body is machined from 316 Stainless with thick walls, so it can take a beating and still keep on ticking!

This is the Bracket which conveniently mounts to the Inspiration DSV via the front screw:

You'll notice the "slot" at the back of the DIVA™ Bracket - this is so that you can adjust the height of the DIVA to suit your own personal preference!

Like everything we build, we try to keep real divers in mind, and wherever possible give them options to control and adjust their system to their own liking - and we don't have to tell you that giving divers choices as to how their particular machine works is a rather radical concept in dive computers and controllers!

To that end, in upcoming software revisions, you will be able to adjust ALL your System Alarms/Notifications which include:

1) LED's located in BOTH Primary and Secondary Displays - On or Off - Divers choice

2) DIVA™ Alarms:

• Low/High Set-Point out-of-range (On/Off)

• Fast Ascent Warning (On/Off)

• Deco Stop Violation Warning (On/Off) *requires hardware update to come

•Hypoxic Mix Alarm (On/Off)

3) Wrist Unit Alarms: Backlights Flash on/off during Alarm Events which should also notify nearby divers that your system needs attention (in low light conditions, of course) - thereby alerting buddies that you may need assistance.

NOTE: Low (less than .20) and High (greater than 1.8) ppO2 Alarms are NOT able to be turned off by the diver.

Is this cool or what?

For more information, please feel free to contact us HERE.

The Retail Price of the Complete Hammerhead® (Including the DIVA™) is $2,995.00 (plus shipping).

If you wish to order, please send an e-mail to us at hammerhead@electricfilm.com.

For more information, please e-mail us at the link posted above.

Inspiration™ is a TradeMark of the AP Valves Company

Hammerhead™ is a TradeMark of Juergensen Marine

DIVA™ is a TradeMark of Juergensen Marine

All photographs and Text ©2003 Juergensen Marine. All Rights Reserved

Back to the HAMMERHEAD Page

O.K. I'm Convinced Already - I want to Buy One of These!! E-Mail HERE

Mark 15 Closed Circuit Mixed Gas Rebreathers

Rebreather Modifications

Mark 15 Maintenance Manual

HOME

Diving and Misc. Pictures of People and Things